I have not seen any mention of this on the forum so far so I thought I'd mention that it appears that Trijicon is coming out with a 6.8mm calibrated BDC for the TA31, model number TA31F-6.8.
I stumbled across this after reading through their brochure located at http://trijicon-inc.com/pdfs/acog.pdf that lists the TA31F-6.8 model.
An email was sent to Trijicon customer support and they replied with the following:
"This optic is not yet available and information is limited at this time. You are welcome to check back after the first of the year to see if more is available."
I realize there are other BDC's available that will match fairly close to the 6.8 depending on what you are shooting but the 6.8 BDC will probably be a better fit. Trijicon could not provide anything further than the above so it may be some time before its available. If you are in the market for a new ACOG in two or three months it may be worth checking out.
NC68
I stumbled across this after reading through their brochure located at http://trijicon-inc.com/pdfs/acog.pdf that lists the TA31F-6.8 model.
An email was sent to Trijicon customer support and they replied with the following:
"This optic is not yet available and information is limited at this time. You are welcome to check back after the first of the year to see if more is available."
I realize there are other BDC's available that will match fairly close to the 6.8 depending on what you are shooting but the 6.8 BDC will probably be a better fit. Trijicon could not provide anything further than the above so it may be some time before its available. If you are in the market for a new ACOG in two or three months it may be worth checking out.
NC68
