6.8 SPC Forums banner

421 - 425 of 425 Posts

·
Registered
Joined
·
181 Posts
I'm using Lever with the 95gr SMK and seeing 2850fps with sub MOA accuracy. My go to for ringing steel @ 600
 

·
Registered
Joined
·
33 Posts
22" Barrel
2.295" COAL

---------------------------------------------------------------

95gr SMK
29.5gr CFE223
2950fps
Extractor marks and cratering

62053


---------------------------------------------------------------

105gr VLDH
28.5gr CFE223
2820fps
Extractor marks and cratering

62054


---------------------------------------------------------------

105gr Nosler
28gr CFE223
2742fps
Some extractor marks, no cratering
62055


---------------------------------------------------------------

Looks like I started a little on the hot side, which was not my intention. I'm going to step down at least half a grain everywhere and work up, hoping to find something with good accuracy potential before I get back to pressure signs. I imagine I'll still be able to get acceptable velocities after stepping things down a bit.
 

·
Registered
Joined
·
6 Posts
Using cfe at 2.29
100gr Speer grand slams
3 in 1 hole, tested them in jugs and velocity at the jugs was 2583fps, bullets expanded real real well, went through 3 jugs and about 3” into a water logged 6x6 treated block.
It’s shed 19 grains of lead, the rest held together pretty good.
 

·
Registered
Joined
·
6 Posts
Using the hornady comparator, they were btogive 1.695 after subtracting the comparator
Shoots tight as whale +%#!
 
421 - 425 of 425 Posts
Top