6.8 SPC Forums banner
  • Hey Guest, it looks like you haven't made your first post yet. Until you make an introduction thread, the rest of the site is locked to posting. Why not take a few minutes to say hi!

PRI or CP 10 rounder?

1858 Views 10 Replies 11 Participants Last post by  CannonCocker
I've been wanting to pick up a few more mags for hunting purposes and load workup and was wondering what the latest consensus is on these two mags.I know that the PRI allows me to load longer which is a plus for us reloaders but I've also read that they've been having issues with sticking followers and out of spec mag bodies.
What's everyone else doing for mags and just how far out can one reliably load a CP mag?
Thanks guys.
1 - 1 of 11 Posts
I have both 10's in CP and PRI, my PRI's load longer @ 2.305 and the CP's like 2.295. I usually load out to 2.290 max so I can use either mags. I have no issues with either mags and both feed well and have never needed any reworking at all.

On a side note what I have noticed about CP 15-17 depending on the followers are if you experience and feed problems I set these mags aside, clean them and continue to break them in. All became reliable after the 4-5 loadings, and this is with out tweaking the feed lips. YMMV
1 - 1 of 11 Posts