6.8 SPC Forums banner

1481 - 1498 of 1498 Posts

·
Registered
Joined
·
16 Posts
I know there aren't many but if you are loading Barnes 95GR TTSX, I ended up with 11 in a partial box in a trade. Will mail in a padded envelope, no box.
If you need them let me know.
I also have 30+ SSA (Nosler) brass, 1x fired in an ARP chamber. I won't use these.
 

Attachments

·
Registered
Joined
·
134 Posts
jrhtx - I'd like the Barnes and if you don't mind, the brass. PM incoming.

I still have around 35 pieces of Remington large primer brass if anyone wishes.
 

·
Registered
Joined
·
275 Posts
Hey guys, I got some Duracoat and thinner if anyone would like it. Moved for job so it will go bad before I am back living in a house.

Got
Tactical Dark Earth
Tactical black
Tactical OD green
Tactical black
Tactical dark blue (really dig this color)
Hardener and maybe an ounce or two of thinner.

Probably enough to do a pistol size item in every color. Some would be enough to do a rifle.
 

·
Registered
Joined
·
101 Posts
4 empty chamber flags, Not really worth much but then again I've found that range safety, etiquette and courtesy are contagious and that's worth a lot. I buy these separately on Amazon and assemble them myself. I've given a ton away over the years.

One per customer sent postpaid. Claim here then PM your address.
021.JPG

20210331_201632.jpg
 

·
Registered
Joined
·
4,558 Posts
I've got an old Lyman powder throw with a broken handle and a 7-inch free-floating handguard with barrel nut. Maybe some one can use the parts off the powder throw or could use the handguard. Let me know and I'll ship them to you.

70026
 

·
Registered
Joined
·
50 Posts
I can put that powder throw to use. I have extra parts for them and should be able to rebuild that one.

I have a Sig 320/250 compact grip module to offer up. IIRC it is FDE/tan
 

·
Registered
Joined
·
4,558 Posts
The 7" free-float handguard is still available. The primary reason I kept this around was for the barrel nut. It can be machined and used to construct light-weight carbon handguard from commercial available parts.

70126
 

·
Registered
Joined
·
312 Posts
I have some misc brass to 3 good homes. Don't reload but save brass.
1. 357, 30/30, 6.8, 38 SPL, 357
2. Qt baggie of 223/556
3. Qt baggie of 223/556

Claim here then PM please. Shipping is on me.

70790
 

·
Registered
Joined
·
98 Posts
I have some misc brass to 3 good homes. Don't reload but save brass.
1. 357, 30/30, 6.8, 38 SPL, 357
2. Qt baggie of 223/556
3. Qt baggie of 223/556

Claim here then PM please. Shipping is on me.

View attachment 70790
I would like to claim #1 and post something to give back. Thank you

Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
191 Posts
I'll take them. I just ordered some 64 gr nosler bonded to work up loads for my .223 wylde. Thanks!

Sent from my SM-G973U using Tapatalk
 

·
Registered
Joined
·
1,407 Posts
Some duplicate widgets someone may need:

RCBS collet for 10mike-mike or foty cal. Accidentally bought a second one somewhere along the line.

70941


RCBS Trim Pro shell plate #3 (308, 6.5CM, etc). A buddy borrowed the trimmer, lost the plate, ordered a replacement, found the plate. So I never opened the replacement and he didn't want it back.

70942

(cci450s not included)
 

·
Registered
Joined
·
29 Posts
You've at least got a good buddy to fess up to losing a part, let alone buy the replacement.
 
1481 - 1498 of 1498 Posts
Top