[MTGUNNER]

Paul, I noticed in the reloading chart that noone uses the CCI 400 primers for the loads. Is there a special reason for this??? :?: I have used CCI's for years and was just wondering.


>> Jan <<


Thanks for the replies, guys. Guess I will use what I have and start off a little low for the loads listed w/o them.

 

[rcrandall]

I use them, they work fine but do not have as hard a cup. I use them for moderate training loads.

 

[Mark21]

It's all I use in 5.56 and 6.8 loads.

 

[angsniper]

I use them all the time, no issues, no slam fires. Prefer them. Using some wolf SR now and they seem to be doing fine also.

 

[paulosantos]

They work pretty well, but they don't fit as snug as the #41, which you will notice after several reloads.

 

[sigpros]

Glad they are ok to use. Just picked up 3k of them and 1200 winchester.

 

[sigpros]

Glad they are ok to use. Just picked up 3k of them and 1200 winchester.

 

[Test_User]

the wins are the smallest diameter and the hottest standar primers. They will fit loose the soonest even after 2-3 loading and because of the hotter flam will have larger Vel spreads but they do work. I suggest you use the Wins first while your cases have the least number of loadings. Then goto the CCIs after that get WOLf or CC Br4 Rem 7 1/2 These tend to produce the best flame for the 6.8 creating the lowest vel spreads.