6.8 SPC Forums banner
  • Hey Guest, it looks like you haven't made your first post yet. Until you make an introduction thread, the rest of the site is locked to posting. Why not take a few minutes to say hi!
1 - 4 of 4 Posts

· Registered
95 Posts
Discussion Starter · #1 · (Edited)
Brand new from Noveske 14.5 inch Afghan barrel with the Noveske gas block. It is the brand new one --specs below. I have new Vortex to go with it also for an extra- $ 90 and a new YOUNG phosphate coated bolt carrier with a STAG 6.8 bolt for an extra $ 160
Will not sell the bolt group without selling the barrel first.
--1 in 12" twist polygonal rifling
--6.8mm SPC MOD 1 Chamber (.100 Freebore)
--Carbine length gas system
--Extended feed ramps
--5/8x24 muzzle threads
--Bead blasted finish
--1" long gas block seat
--Pinned Low Profile Gas Block

The barrel ships with gas block installed and the dowel pin in place. This barrel is designed for a 1" long gas block (INCLUDED). A standard front sight base is 1.9" long and WILL NOT FIT. The installation and the assembly on the barrel should be performed by a qualified gunsmith and/or certified armorer. Removal and installation of the gas block dowel pin is required to complete the assembly process.

$ 450 + $ 15 shipping ---FIRM ---- and no trades- Paypal with 3%
Did not think pics were really needed, its in the plastic 100% new
add $ 90 for the Vortex
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.