6.8 SPC Forums banner
1 - 4 of 4 Posts

· Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
I have a chance to buy a very nice upper made with an 18inch chrome lined spr barrel from kotonics....11 twist, II chamber.

I beleive this barrel is from the lot that had issues....but, are they safe with the non-combat loads??? I have no intention of using the hot loads. This is gonna be a whitetail getter and I will stick with the commercial loads....

Kick is I need to decide ASAP....so any help you guys can give would be very appreciated
 

· Registered
Joined
·
2,179 Posts
From what I gather, you should be good to go with the regular loads and have a pretty darn good chance that you are good to go with the combat loads. If I were you i would go ahead and purchase a box of the regular loads and a box of the tactical loads, and fire both. If you dont have any pressure signs with the tactical loads you will be good to go, and have a little better velocity for them frolicking whitetails
 

· Registered
Joined
·
3,086 Posts
If you reload, I would get a box of the Tubb's final finish bullets and load them up to break the barrel in. Then buy a box of the SSA 115 Gr. Tactical Loads and see if your barrel can handle them. If it does, you have a good barrel that will handle all of the factory loads out there.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top