[BullittBoy]

Man that bullett is LOOONG compared to others I have. Are you guys having better luck loading them at the top or bottom of the cannelure, and how much H322 should I try with a 1/10 CMMG SPCII chamber?

 

[paulosantos]

Man that bullett is LOOONG compared to others I have. Are you guys having better luck loading them at the top or bottom of the cannelure, and how much H322 should I try with a 1/10 CMMG SPCII chamber?

You should be able to stuff at least 29 GR in there. Harrison had the best accuracy loading them at 2.3", but you can load them anywhere from 2.245"-2.3" depending on the mag.

 

[constructor]

actually I ended up at 2.295, and believe it or not 32.5 gr of H335 gives me the best accuracy in the 12 twist I have now. No doubt you can find an accurate load with H322 but I haven't used it in a few years and have never shot it with the Nosler.

 

[HTR]

I ended up with COAL of 2.295, and 29.5 grains of RE10X.

It's fast ( 2675-2689-2680-2693)
group size was about 1.067'
SSA
Wolf

 

[BullittBoy]

Thanks for the info guys!
So are you guys using the cannelured bullets?
Should I try loading them out as far as I can in the PRI mags for accuracy? I guess what I am asking is loading this bullet out as far as you can gives you better accuracy with this bullet?

As a side note believe it or not they had them at Bass Pro Shop for $20 a box of 50. Good price in these times-I was shocked!