[Alex_TN]

Hello all. My name is Alex and I am new here and need some help locating parts. I guess the easiest way to do this is to list everything that I need, and I really need assistance in locating these items. I already have a stripped lower and a barrel on the way from Titan ( 16" ) The following is what I need.


1. Bolt and a carrier group ( can be separate)
2. All parts for barrel to function with the rifle, like the gastube and such.
3. Upper. I would like an A3 fully assembled.


My other question is that if I run the Titan barrel with the mid-length gas port what size fore-end can I put on it to completely cover the gas block? which gas block will fit under a quad-rail full length fore-end? Will there still be enough room to fit a front fixed sailboat sight to the barrel?

Thanks for reading all this crap and I hope to find some answers.

 

[Eliminator]

Actually Titan can probably supply most, if not all, of the parts you need for the upper. Is there a reason for not getting a complete upper assembly from them? You will save some $ buying a finished upper from Titan rather than doing it a bit at a time. Ask me how I know.
In any event, you can get everything you need to complete the upper from the following:
Titanarmory.net, AR15Performance.com, Bravocompanyusa.com, and Rainierarms.com

 

[LKirchoff68]

You can also look at bisonarmory.com. They are a site sponser and should have just about everything you would need if Titan Armory doesn't.

 

[Alex_TN]

thanks for the help

 

[tbready]

Check out Constructors new ITS super bolts. Definitely a good buy.