[Forest]

Over on A15.com Tim had a post showing the loads he was able to acheive before showing pressure. It was tacked in his forum. By chance did anyone save that information?

Thanks!

 

[paulosantos]

I remember it was about 32 Gr. of H332.

 

[Test_User]

Forest look at the load chart it has every load anyone posted on any forum back them for the 6.8 and includes those you are looking for and I have the username that posted them. You should find what you are looking for there. There is a link to download the excel version in that thread as well. Tim really only stuck with H322 and I can tell you from testing that included pressure testing that I would not use that load for general use. There are better choices.

 

[Forest]

Thanks guys!

 

[snaz567]

Tim really only stuck with H322 and I can tell you from testing that included pressure testing that I would not use that load for general use. There are better choices.

Sorry for the hijack, but I'm looking to buy a couple 8lb bottles of powder for loading up the 100gr and up bullets. I use H322 for some 223 loads, but switched most of them over to Varget.
So I'm open to suggestions for what the better choices for those weights of bullets would be..
Thanks

 

[marinesg1012]

Per H and I think Tim RE10X seems to be the ticket for 100 and up....

 

[snaz567]

That's what I was assuming,but thought I'd ask anyways.

Thanks.

 

[Test_User]

Varget is too slow and as improtnat way to bulky.

10x for extruded H335 or Xterm for ball.

 

[snaz567]

Varget is too slow and as improtnat way to bulky.

10x for extruded H335 or Xterm for ball.

Thanks, I'll look for some of those.