[ccoker]

I think I have a problem
I am seriously considering just getting another 6.8 upper, a lightweight 16 with an Aimpoint or Eotech for to compliment my 18" barreled with a big scope, one for stalk hunting and one for stand / night hog hunting

 

[LKirchoff68]

I think I have a problem
I am seriously considering just getting another 6.8 upper, a lightweight 16 with an Aimpoint or Eotech for to compliment my 18" barreled with a big scope, one for stalk hunting and one for stand / night hog hunting

I don't see any problem with that.

 

[ccoker]

this place is like going to a bar at midnight on Friday and asking if you should stop drinking!

 

[DDriller]

Then you'll need to add a 20" for long range targets.

 

[Jamesb74]

and a 14" for those quick shots plus the other ones will need a baby brother.

 

[marinesg1012]

Well I just switched my 18 to a 20 with a mildot scope for longer range stuff, then I will have a 16 MK68 with an Acog for general stuff... then i want to get a 12.5 with a red dot for those times I get to head down to HTR place

 

[LKirchoff68]

Well I just switched my 18 to a 20 with a mildot scope for longer range stuff, then I will have a 16 MK68 with an Acog for general stuff... then i want to get a 12.5 with a red dot for those times I get to head down to HTR place

and then....and then....and then.....and then comes the night vision....and

 

[ron169]

Im thinking either a 10.5 in SBR or an 8 in pistol to round things out.

DOnt feel bad, here is my current plans

16 in Xtreme
18 in SPR clone
12.5 in SBR with supressor
10.5 in Pistol

Oh and if its ever possible, a 20 in A1 clone with triangle forearm etc!

 

[marinesg1012]

and then....and then....and then.....and then comes the night vision....and

I already have a PVS 14.... After that I will probably build a 6.8 bolt gun....

 

[LKirchoff68]

I got the 18" coming in pretty soon. Just waiting on my FSC30 to get here so I can send it off to Ben with Bison to put it all together for me.

When I first purchased the barrel, I intended on swapping it for my 1:9.5 Kotonics I already had a new spare bolt so I was just going to use it. About a week goes, I get an email asking if I need a gas block, tube, or an upper. I said no thanks. Couple days later, I found myself emailing Ben asking for a HS bolt, a tube, a gas block, a YHM FF quad, and 2 stripped YHM uppers.

I figured I will just swap out uppers and use the same bolt carrier. A few days later, I am purchasing a Timney trigger (for my stripped lower), a Stag 6.8 BCG, a Troy TRX Extreme Battle Rail, front and rear Troy sites, Troy sling, complete Vltor stock assembly, a Harris bipod with Larue QD mount, and I am now looking for an optic.

BRD got me bad!

 

[marinesg1012]

I acctually really want to focus on shooting my rifles more, I have a ton of different stuff in my collection, and I hardly use them all.... I bought each one to fill a nitch and now I just want to use my 6.8 to fit 95 percent of my needs....

 

[ccoker]

I am struggling with that very thing

 

[BRODERICK]

+2 on that

 

[6.8Vol]

It's always good to have a niche that needs filling. One of life's necessities.

 

[ccoker]

well, I am going to get a 16" from Harrison
set it up with an aimpoint or eotech for stalk hunting and have my 18" with the big scope for night time hog hunting

 

[6.8Vol]

And you can thank my avatar anytime

 

[ccoker]

don't get me started with that SOB!

 

[6.8Vol]

I had to do that :lol

 

[Equalizer_2]

I had to do that :lol

Maybe we need to post your avatar on billboards all over the country so gun owners can thank him.

If he hadn't made such a push to sell guns a lot of new owners would still be sitting on the fence.

On second thought, maybe that would cause a lot of damage to those billboards.