6.8 SPC Forums banner
Status
Not open for further replies.
1 - 20 of 266 Posts

· Registered
Joined
·
7,772 Posts
Here is my AR performance 18 inch 1-11 upper with a 12 inch Danial defense RIS rail on a Bushy lower with a UBR stock and a MIAD grip...
here is the rifle with the 3.5-10X sightron III scope with mil dot retical in a larue SPRe mount


and here is the same rifle with my aimpoint with 2 moa dot and the PVS 14 in a larue mount with my surefire forgrip with the IR filter....


all this crap is probably going onto my 16 inch MK68 when I get that in... and this upper is being converted to a 20 inch 1-12 3 groove :D

and here is one dead piggie that I took at HTR's ranch with a borrows 3x magnifier 85 grain barnes TSX SSA factory loading at 160 yards as he came across the road looking for some free corn....
 

· Premium Member
Joined
·
6,339 Posts
Spikes upper and lower. (Now has a Stag 6.8 lower) CA 16" 11:1 Spec II barrel with YHM customizable FF tube and MSTN quiet brake. Buckmaster 4.5x14 mildot scope

 

· Registered
Joined
·
164 Posts
Love the avatar, Paulo!

My rifle:
I've had the upper for about a year, but I finally got the lower completed.

Cardinal Armory 18" SPR upper, SPC II, 1:11" twist with Phoenix flash hider
Tactical Innovations T15BDX billet lower
VLTOR EMOD stock in Flat Dark Earth
Magpul MIAD in Flat Dark Earth
RRA 2-stage NM trigger
RRA ambi-star selector
RRA parts for the lpk
GG&G MAD buis with a MI front flip sight
Magpul XTM rail panels in Flat Dark Earth
Barska 4-16x50AO scope (soon to change, I hope)

 

· Registered
Joined
·
237 Posts
LWRCI
M6A2 6.8 SPC 16" Barrel
Millet DMS-1 (1-4 X 24) Illuminated
LaRue LT 104 SPR QD Scope Mount
Troy Ind. B.U.I.S. (New front sight w/ detent)
Timney Skeleton (4lbs)
Ergo Grip (Sure Grip)
Tubbs flat wire spring (w/ H2 Buffer)
Viking Tactics/LaRue padded sling (VTAC-LR2)
Daniel Defense QD front sling adapter
Tapco Ergo low profile rail covers
Accu-Shot's "Atlas Bipod" w/
LaRue Tactical 17S upgrade LT-171 Mount
CProducts 5 & 25 rounds mags w/ Ranger plates

AAC Suppressor
SPR/M4 2008 Model w/ M.I.T.E.R. System

 

· Registered
Joined
·
2 Posts
Hey Guys,

I haven't posted in here in a while, but saw the picture thread and couldn't resist.

Here is my pig gun -



Diablo 6.8 7" Upper
Sun Devil Lower
VLTOR EMOD stock
Magpul MIAD Grip
Timney Trigger
Gemtech Sandstorm Suppressor
Leupold 1-5 MR/T in a LaRue SPR Mount
Grip Pod, PRI mags and Pentagon Light

Todd

(yes - the pigs are little - it isn't my fault - I didn't breed them... just killed them.)
 

· Registered
Joined
·
1,581 Posts
Hey Guys,

I haven't posted in here in a while, but saw the picture thread and couldn't resist.

Here is my pig gun -



Diablo 6.8 7" Upper
Sun Devil Lower
VLTOR EMOD stock
Magpul MIAD Grip
Timney Trigger
Gemtech Sandstorm Suppressor
Leupold 1-5 MR/T in a LaRue SPR Mount
Grip Pod, PRI mags and Pentagon Light

Todd

(yes - the pigs are little - it isn't my fault - I didn't breed them... just killed them.)
That is a sweet rig!
 

· Moderator
Joined
·
8,980 Posts
Hey Guys,

I haven't posted in here in a while, but saw the picture thread and couldn't resist.

Here is my pig gun -



Diablo 6.8 7" Upper
Sun Devil Lower
VLTOR EMOD stock
Magpul MIAD Grip
Timney Trigger
Gemtech Sandstorm Suppressor
Leupold 1-5 MR/T in a LaRue SPR Mount
Grip Pod, PRI mags and Pentagon Light

Todd

(yes - the pigs are little - it isn't my fault - I didn't breed them... just killed them.)
It doesn't matter if they are little. In fact that is the best kind. I can smell the BBQ from here. Nice rig and nice pig's.
 

· Registered
Joined
·
92 Posts
Here's mine. Finally found a Stag upper to replace the Ko-tonics upper I should have never let go.



- Sabre lower
- CTR - milspec stock
- Millet DMS-1 with ADM recon mount
- YHM spectre leength customizable HG
- YHM lo pro gas block
- Phantom FH (not seen)
- Harris bi-pod (not seen)
 

· Registered
Joined
·
2,179 Posts
Hey Guys,

I haven't posted in here in a while, but saw the picture thread and couldn't resist.

Here is my pig gun -

Diablo 6.8 7" Upper
Sun Devil Lower
VLTOR EMOD stock
Magpul MIAD Grip
Timney Trigger
Gemtech Sandstorm Suppressor
Leupold 1-5 MR/T in a LaRue SPR Mount
Grip Pod, PRI mags and Pentagon Light

Todd

(yes - the pigs are little - it isn't my fault - I didn't breed them... just killed them.)
What is the overal length with the can on it? I mean from the end of the receiver.
 

· Registered
Joined
·
8 Posts
I had just posted the new pic on the old board, oh well I'll do it again. I've still got a few things to do yet and I may put on a new gas block but I am not sure yet.

RRA 16" Midlength 6.8 Upper
RRA Lower with Milspec buffer tube
MI BURS
Magpul ASAP Plate
Magpul MOE Foliage Green
Magpul MAID Grip FG
Daniel Defence Omega 9.0 Free Float Rails
Tango Down Short Battler Grip with quick detach throw lever.

 

· Registered
Joined
·
7,772 Posts
I like that rifle.
 

· Registered
Joined
·
5 Posts
Thanks, I walked into the local shop a few weeks ago and saw it up on the wall with the light shining down from heaven and music in the background and I knew it was meant to be. I went in looking for a new Stag 6.8 but this was the one that they had in stock and it already had a lot of the upgrades that I would have done anyway.
 

· Registered
Joined
·
905 Posts
Hey Guys,

I haven't posted in here in a while, but saw the picture thread and couldn't resist.

Here is my pig gun -



Diablo 6.8 7" Upper
Sun Devil Lower
VLTOR EMOD stock
Magpul MIAD Grip
Timney Trigger
Gemtech Sandstorm Suppressor
Leupold 1-5 MR/T in a LaRue SPR Mount
Grip Pod, PRI mags and Pentagon Light

Todd

(yes - the pigs are little - it isn't my fault - I didn't breed them... just killed them.)
I don't know what your talking about. Those pigs are perfect eatin size. Anywhere between 40 and 125 pounds is the way to go if you just want the meat.

That is a sweet rig!
+6.8
 

· Registered
Joined
·
234 Posts
I don't know what your talking about. Those pigs are perfect eatin size. Anywhere between 40 and 125 pounds is the way to go if you just want the meat.

+6.8
I hear a lot of people talking about the size of pigs and that the small ones are better to eat. I have lived in North Texas for about 8 months and have shot over 40 pigs since I have been here. Most I just leave for the coyotes but I have butchered 75 pound pigs all the way up to 400lbs and as long as the pig is healthy they all produce good meat.

All but 2 have been taken with my AR15(223). The other two with a remington 700 (270cal).
 

· Registered
Joined
·
22 Posts





-Stag 6.8SPC Upper Reciever
-Arizona Armory Lower Reciever
-Yankee Hill Smooth Carbine Forearm
-Yankee Hill Front Sight Tower
-Troy Industries Rear Battlesight
-Magpul CTR Stock
-Primary Weapon Systems FSC30 Compensator
-Cerakote Finish (Patriot Brown, Done By Jeff At Arizona Armory)
 
1 - 20 of 266 Posts
Status
Not open for further replies.
Top