6.8 SPC Forums banner
  • Hey Guest, it looks like you haven't made your first post yet. Until you make an introduction thread, the rest of the site is locked to posting. Why not take a few minutes to say hi!

6.8 Extractor

4966 Views 18 Replies 7 Participants Last post by  Bortelid UK
Can anyone help I need a replacement extractor for the bolt of my 6.8 AR as the one I have has a chip out of it, rifle is fully legal here in the UK and there is no restriction on replacement parts, thanks .PM if you can help.
1 - 1 of 19 Posts
A regular 5.56 will likely work. Try the one you have in your 5.56 bolt. Swap it and try hand cycling the gun and see if it snaps over the rim ok and cycles. If it does you will likely be fine.
1 - 1 of 19 Posts