6.8 SPC Forums banner
1 - 20 of 75 Posts

·
Registered
Joined
·
2,606 Posts
Discussion Starter · #1 · (Edited)
Starting a new thread for 2017

Hopefully this frankengun cycles with 90 grain XM68GD with out any drilling.... mid gas 18" 6.8 ARP with MI gen 3 15" hand guard, Magpul MOE-K2 grip, Sig A1 carbon fiber stock, 6.8 marked nitride carrier with Ruger NiB 6.8 bolt, Gamma 6.8 VG6 brake and Larue MBT. SWFA SS 3-15 on top for now. Need to scrounge up a trigger guard... lost my lower spare parts box after packing.




Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
2,606 Posts
Discussion Starter · #2 ·
And a 2017 update to the oldest AR I own. 16" ARP 6.8 with SSA-E, ceraplated carrier with super bolt and MIAD grip. 2017 changes are 15" MI Gen 3 FDE hand guard and LUTH-AR MBA-3 FDE stock. Removed the UBR to cut weight.




Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
18 Posts
My new baby:
  • LWRC Six8 Upper and Lower from the group buy
  • Custom Cerakote in Textured Cobalt with Burnt Bronze Accents
    • Couldn't get ambi mag release off because LWRC staked it so no cerakote on the lower
  • Bison 16" Barrel
  • Diamondhead rail
  • JP Silent Capture Spring
  • Geissele High Speed National Match DMR Trigger (worth every penny)
  • BAD-ASS ambi saftey
  • Magpul ACS
  • SLR Sentry 7 Adjustable Gas block
  • Raptor Charging Handle
  • Vortex PST 1-4 on Larue QD mount
  • 6.8 BCG and Bison Bolt


Six8.jpg
 

·
Registered
Joined
·
12 Posts
Parts List:
*Umbella Corporation Weapon Research Group HUUCR Rcvrs, Carrier, Chg'n Handle, Grip & Lwr Parts Kit
*Midwest Industries Gen 3 15" Mlok
*16" ARP Fluted Socom Profile 6.8, Matched SuperBolt & Vortex 3 Port flash hider/comp
*2A Arms Ti Gas Block & Take Down/Pivot Pins
*Geissele Tricon Firing Control Group
*Battle Arms Ambi Safety
*LMT buffer Tube
*Magpul ACS Lite Stock
*Noveske QD Plate


 

·
Registered
Joined
·
6 Posts
6.8 Bison setup

68 photo.jpg
16" 1:7 twist Recon BSP (Subsonic) 6.8 SPC Stainless
Young Mfg Chrome w/Standard 6.8 bolt
Bison Armory Low Pro Gas Block
PRI QC Brakes - Tapered SS
13" Troy Alpha Rail w/sight
 

·
Registered
Joined
·
470 Posts
10.5in 6.8SBR

image.jpeg image.png
new upper I plan to take for range day.
 

·
Registered
Joined
·
163 Posts
My new baby:
  • LWRC Six8 Upper and Lower from the group buy
  • Custom Cerakote in Textured Cobalt with Burnt Bronze Accents
    • Couldn't get ambi mag release off because LWRC staked it so no cerakote on the lower
  • Bison 16" Barrel
  • Diamondhead rail
  • JP Silent Capture Spring
  • Geissele High Speed National Match DMR Trigger (worth every penny)
  • BAD-ASS ambi saftey
  • Magpul ACS
  • SLR Sentry 7 Adjustable Gas block
  • Raptor Charging Handle
  • Vortex PST 1-4 on Larue QD mount
  • 6.8 BCG and Bison Bolt


View attachment 21537
It's nice to see a diamond head hand guard, I've been on back order for over one and a half months to get one for my new build. It is giving me time to question if I want add a JP Enterprises silent capture spring to it though!

Very nice looking firearms members!

Sent from my XT1650 using Tapatalk
 

·
Registered
Joined
·
80 Posts
Bought this bison upper last year for pistol while i waited for the stamp. Now it's finally built the way i wanted it. Bison 11.5 with a dead air sandman s on the end. Larue trigge, 3-9x40 Leupold. I like it a lot

IMG_5789_1.jpg
 

·
Registered
Joined
·
18 Posts
It's nice to see a diamond head hand guard, I've been on back order for over one and a half months to get one for my new build. It is giving me time to question if I want add a JP Enterprises silent capture spring to it though!

Very nice looking firearms members!

Sent from my XT1650 using Tapatalk
Thanks!

I fell in love with the Diamondhead when I built my 300BO SBR.

I really really like the JP SCS as well, the "sproing" noise when shooting AR's always irritated me.

I need to find a buddy with a mill so that I can mill out the stake on the ambi mag release so I can cerakote the lower, it's really irritating me that it's not 100% color schemed.

I have since upgraded my optic to a Vortex Razor 1-6 such a lovely piece of glass, a little heavy but I can tolerate it!

Six 8.JPG

Bonus pic of my 300 BO

BO.JPG
 

·
Registered
Joined
·
24 Posts
OK, I'll play. Remington LTR in 6.8 modified from ADL to BDL and put in B&C Alaskan stock. Talley Lwt. Mounts and basic Leupold VX2 3x9


 

·
Registered
Joined
·
177 Posts
Black ones a 6.8 built by H, other one is a 5.56 I built (first build).ps: if anyone has any interest in the hanguard on the 6.8 let me know, probably looking to sell fairly cheap
 

Attachments

·
Registered
Joined
·
7 Posts
I will play too. On left is a rifle I traded for a few months ago. The second is an sbr I just got done building. Have shot the 16 inches about 60 times, have not put a round down the tube of the sbr.

 

·
Registered
Joined
·
39 Posts
First build down. Finished up Sunday. Only trouble I had was with the barrel extension fitting in the upper receiver. But some grease and persuasion fixed that. And I'd rather have a tight fit than loose. Only thing I forgot was putting loctite on the gas tube. Which will get done tonight.. Ill take more/better pics when that is done tonight.
Parts list:
Psa complete lower and buffer tube
Magpul stock and grip
Bcm Blem stripped upper
Arp 750 bolt with aim carrier group
Bcm mod 3 charging handle
Arp 6.8 3r 16" scout profile with vortex 2 port muzzle brake/flash hider
Odin works adjustable gas block
Mid length gas tube
Alg emr v1 mlok hand guard
Aero precision spr mount
Vortex 2-8x32 diamondback Hp scope
 

Attachments

1 - 20 of 75 Posts
Top