6.8 SPC Forums banner
  • Hey Guest, it looks like you haven't made your first post yet. Until you make an introduction thread, the rest of the site is locked to posting. Why not take a few minutes to say hi!
1 - 4 of 4 Posts

· Registered
Joined
·
1,220 Posts
Discussion Starter · #1 ·
i'm going to build my next 6.8 and want a DMR type rifle with a 20" barrel. it needs to be able to stabilize the 120 Barnes solids. Bison has 11 twist barrels with a rifle gas system that look good. any others out there. i looked at extreames due to all the good talk but they are all 16". it's either that or i build my own. i would hate to have to chase down a reamer and such but would happily do it to get what i want. so the basic question is this. Bison the only game in twon? are they good enough for what i want to do?
 

· Registered
Joined
·
7,772 Posts
the 120's need a 1-11 or 1-12 IIRC... now you could PM Constructor and see if he will order you a 1-12.... OR you can wait on Bisons 1-11...
 

· Registered
Joined
·
5,565 Posts
Stag Model 7's are 20 inch barrels. You would have to thread the muzzle though, and change out handguards.

Bison may be a better choice though.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top