[tbready]

Anyone run across a real good load for 110 gr Accubonds 14'' and 16'' barrel? Gettin ready for a good deer hunt when season hits.

 

[constructor]

Anyone run across a real good load for 110 gr Accubonds 14'' and 16'' barrel? Gettin ready for a good deer hunt when season hits.

32.5gr H335 Noslers set to 2.295" if you have a barrel that can handle that load.

 

[BISCUT]

I'm using a K-Tonics 18" SPII and get the best accuracy w. H322 29.5gr seated to PRI mag max length.

 

[tbready]

I gotta get some PRI mags. All I have is Barrett and C-products. After seeing HTR's new post about the OAL is best at 2.30'' for most I must at least get some PRI's for hunting. Thanks. Going to try some hot loads in the new Armalite when I get the chamber converted. The 4 groove barrel should give us some good results hopefully.

 

[constructor]

I gotta get some PRI mags. All I have is Barrett and C-products. After seeing HTR's new post about the OAL is best at 2.30'' for most I must at least get some PRI's for hunting. Thanks. Going to try some hot loads in the new Armalite when I get the chamber converted. The 4 groove barrel should give us some good results hopefully.

Armalite makes good stuff, they just didn't know about the new configurations. All of the guys I deal with there are good guys.
The new PRI waffle mags are only good for 2.295"

 

[msu33]

Armalite makes good stuff, they just didn't know about the new configurations. All of the guys I deal with there are good guys.
The new PRI waffle mags are only good for 2.295"

I have been able to get TTSX's loaded to 2.30" in my PRI waffles.

 

[tbready]

Loaded some Nosler 110 Accubonds with 29.5 gr of H322 and ran them thru the Armalite today. Absolutely no pressure signs and got a moa group at 50 yards, just to test the load. Will stretch out to 100 yards next week. So far I haven't reached the peak yet on this 1/10 4 groove. Damn good barrel.