Reply With Quote1-18 inch 7mm-08.... whenever you get around to it....
DPMS and AR10 series uppers, 308. 7mm-08, 260, 243,6.5x47,6x47
We are getting geared up to produce custom uppers based on DPMS's LR series rifles, and Armalites AR10s. .
chambers avaliable
.308
7mm-08
260
243
300RSAUM
338 RCM
The DPMS based uppers will start at $999 with a vented float tube, that includes a high quality lapped and air-gauged stainless barrel, rifles start at $1549.
Vtacs are on the way and will be an add for difference of cost. Magnum calibers add $100.
Uppers with Shilen or Pac Nor barrels start at $1225
Uppers with Krieger, Bartlein, Hart, Broughton barrels start at $1299
Armalite uppers standard with Armalites alum free float tube start at $1159, complete rifles $1699. Magnum calibers add $100.
ETA- we have added the 6.5x47 and 6x47 lapua to the list- looks like some highpower guys are interested in the ITS 12 with a 6.5x47 chamber.
Last edited by constructor; 06-21-2010 at 08:27 PM.
Don't get caught outgunned, step up to the 6.8mm
3363 hollyridge trail Marietta Ga 30008-- IP 108.209.98.53 --address associated with credit card fraud.
1-18 inch 7mm-08.... whenever you get around to it....
Molṑn Labé
http://www.dtic.mil/ndia/2008Intl/Roberts.pdf
"I figure we are gunman because we are better then most, and it beats branding cows or digging copper" -Appaloosa
Arms discourage and keep the invader and plunderer in awe, and preserve order in the world as well as property... Horrid mischief would ensue were the law-abiding deprived of the use of them.-Thomas Paine
I don't need an AR10
I don't need an AR10
I don't need an AR10
I don't need an AR10
I don't need an AR10
Well the 338 RCM does look impressive. Maybe after I get the BRX up and running?????
Richard
NRA Life member
"Life's tough......It's even tougher if you're stupid."
-John Wayne
Are you in town where we can ship the BRX to you?Originally Posted by DDriller
I don't need an AR10
I don't need an AR10
I don't need an AR10
I don't need an AR10
I don't need an AR10
Well the 338 RCM does look impressive. Maybe after I get the BRX up and running?????
Don't get caught outgunned, step up to the 6.8mm
3363 hollyridge trail Marietta Ga 30008-- IP 108.209.98.53 --address associated with credit card fraud.
LOL A little attractant on the bait, huh?
Make yourselves sheep, and the wolves will eat you. -Benjamin Franklin
NRA Life Member
Certified Firearms Safety Instructor
A Gun's Two Biggest Enemies: Rust, and Politicians
Obama... don't go to Arizona, they require proof of Citizenship.
Politicians=Diapers: Full of the Same Thing and in Need of Frequent Changing.
You should SEE how tight my rifle groups single shots !!!
Harrison,
Will barrels alone be available in 7mm-08 and .260 for the AR-10?
Kerry
Law enforcement officers must understand that armed citizens are there to defend them when they are outnumbered…and to outnumber them, if they enforce unconstitutional law.
__________________________________________________ ___________________
300 AAC Blackout Chambering Cancelled:
Some time ago, Savage announced it would be chambering the Model 10 Precision Carbine in 300 AAC Blackout. Since that time, we have tested many variants of this cartridge in various barrel lengths and rates of twist. This exhaustive testing left us quite unsatisfied with the accuracy we were able to get from the subsonic loads in this chambering. Accuracy with the lighter, faster loads in this caliber was actually quite good. But we believe the real value in this cartridge lies in the use of subsonic loads for suppressed rifles. Therefore we have decided to scrap the project.
It is our understanding that pushing these heavy, slow bullets presents challenges not found in typical loadings and that our experience is not unique. Subsequently, many in the industry have simply adopted a lower standard for accuracy for these subsonic loads. While this does seem reasonable and we don't criticize any in our industry that have taken this approach, it just won't work for Savage.
Our brand was built on accuracy and we are too protective of our reputation for building the most accurate factory rifles available. We would rather walk away from this opportunity than sell a product that requires an explanation.
Retired, Burned Out :
68forums.com Moderator
Gatewaycobraclub.com Moderator
Ex-Mfg. Engineer
Ex-Tool Room Machinist
Ex-CNC Programmer
Ex-Stearman Pilot
Ex-Racing Engine Builder/Shop Owner
Ex-Funny Bike Builder/Competitor
Currently in 10th year as active duty Cranky Old Fart...
RVN 68-72
H. my wife is at home. Go ahead and ship it.
Richard
NRA Life member
"Life's tough......It's even tougher if you're stupid."
-John Wayne
Kerry,
We will offer barrels only, just need to get them in here so I can test. Hopefully the guys making the 6.8 barrels for me can also provide the different calibers, we may not get as good of a price since we aren't commiting to 1000 barrels a year in ea cal. so we'll just need to see how it goes.
My goal is to find accuracy with these house barrels without having to pay the price of a Krieger.
IMO for hunting and casual range duty a consistant 1MOA is good enough, those that want to compete or hit a p dog at 600yds may have to step up to a premium match barrel.
Good deal R. she will ship tomorrow.
Don't get caught outgunned, step up to the 6.8mm
3363 hollyridge trail Marietta Ga 30008-- IP 108.209.98.53 --address associated with credit card fraud.
I want a .338RCM
I want a .338RCM
I want a .338RCM
I want a .338RCM
I want a .338RCM
I deal with about 5%-10% of the population 80%-90% of the time...
Yeah, now I do too...I want a .338RCM
I want a .338RCM
I want a .338RCM
I want a .338RCM
I want a .338RCM
Posting Permissions
